SERVING the Used Equipment Industry SINCE 1991

BACK TO Tech-Assist’s HOME PAGE: www.tech-assist.com

_____________________________________________________________________________

TECH-ASSIST's

FREE Advertising and Networking Services

_____________________________________________________________________________

RECENT FOR SALE Ads

for used, rebuilt or remanufactured:

_________semiconductor manufacturing equipment;

_________pcb/ass'y manufacturing equipment;

_________fiber optics manufacturing equipment;

_________flat panel display manufacturing equipment;

_________optics manufacturing equipment;

_________vacuum, evaporation & sputtering equipment;

_________automatic testing equipment.

_________________________________________________________________________________________

 
NOTE: - equipment was a RECENTLY LISTED by the Sellers during the current 2-WEEK period;
 - equipment list includes NEW LISTINGS too;
 - please DO NOT request the seller names IF YOUR CUSTOMER is BROKER/RESELLER.

__________________________________________________________________________________________

RECENT FOR SALE LISTINGS (listed the past 2-weeks):

THURSDAY, JANUARY 01, 2008
 
 
Manufacturer Model Description
---------------- ---------------- ---------------------------------
(Balance Table) (Composite) Composite/not marble, 3 piece balance table
(Coil Winder) (Custom) hand winder, with clock/counter, 1 to 24. Each turn of hand crank yields 5 turns of chuck
(Dispenser) * 3-Axis Automated Dispensing System
(Jar Mill) (Pocelain) Porcelain jar mill, 1 gallon. 8" OD by 9" tall,
(Jar Mill) (Various) Jar mill jars, many sizes on hand
(Spares) (Parts) Spare Parts
(Stage) (Hot Chuck) Hot Chuck Wafer Stage 8.25" w/Digital Controller
A. Hoffman #600E 15 x 9 x 7", 250°C, inert bake 900 watts, 208 volts
Abbe (Jar) "0", 3 gallon Lumard jar, w/o cover
Abbe (Jar) 000 1/2 pt jar, $90; Abbe 00 1 qt jar, $250; Abbe 1.25 gal, $395
Abbe Rota-Cone 24RCVD vacuum dryer, 2.5 cu ft, 12 KW, electric heat transfer,water cooled condenser & tank...
Accu-Fab Accubot Accu-Fab Accubot Robot & 1250 Motion Controller
Ackerman-Gould MM-2 manual hot stamper
ADE #9300/9350 UltraScan, 'as-is'
ADE DiskMapper ADE Technologies DiskMapper Model M2 System
ADE Technologies Polar Polar Kerr System
Adixen/Alcatel AMS 200 "I-ProductiviAdvanced ICP Plasma Etching System, 2006, 'as-is'
Aetrium  #900A Pick & Place IC Test Handler
Air Products DE202 6" ASA, H2VPG w/water cooled compressor
Airco ST 2" ASA airsplit body alum gate valve
Airco ST 4" ASA air split body, alum gate valve
Airco ST 4" ASA manual split body, alum gate valve
Airco ST 6" ASA airsplit body, alum gate valve
Airco  ST 6" ASA manual split body, alum gate valve
Airco ST 2" CVC air split body alum gate valve
Airco STM 4" manual split body manifold light flange alum gate valve
Air-Vac  DRS26 Rework Station w/ Wild Heerbrugg
Alcatel #1005C Vacuum Pump
Alcatel #2030 Vacuum Pump w/ Franklin Electric Mo
Alcatel #5080 80 l/s, lSO63, air cooled with control
Alcatel #5081CP 80 l/s, 4-1/2" CF, air cooled with control, ceramic bearing
Alcatel #5150 140 l/2, 6" CF, air cooled with control
Alcatel #5150CP 140 l/s, ISO100, ceramic bearing with control
Alcatel CAT#56995 auto air inlet control for turbo vent w/o 2 way valve
Alessi (Prober) Hypervision Microscope w/ Alessi 6" Prober XYZ
Alpha Metals OM700 Omega meter OM700  w/manuals/explosion proof pumps, heaters and wiring. 230/60/1
Amacoil Bobifil Automat A/4 4 spindle fly winder, 18-46 AWG, 1.97" width by 1.97" OD maximum. 1/3 hp, 208/240/60/1. 463#.
Amacoil/Bobifil Automat B single head fly winder with indexing turret,14-42 AWG, 3.94" width, 7.88" dia, .10 to 1.75, 4 step counter
American Electric * heater w/Parr bomb 8 kw, 220V/60/3 actual 3" dia x 60" l. ID
American Tech AT-400 AT-400 lead straightener, .400 x 24 lead
Amistar SR100 solder sucker, 6.5" reach. Lifting board up triggers timer & solenoid.  External vacuum pump req. 115v
Andonian #1331 cryostat
Angstrom TE250  Laboratory ring pulverizer for XRF/XRD specimen preparation
Aoki E & I type core stacking Laminator, manually operated, AK-HEI-35
Aoki Laminators E & I type AK-OEI-SD-C-76.2 AK-OEI-SD-57.15
Aoki Laminators E & I type AK-OEI-SD-48X AK-OEI-SD-X-35 AK-OEI-SD-41.2X
Applied Materials #0240-93220 Kit
Artos CS-6 wire stripper, older model but factory rebuilt, no safety cage.
Ashby Cross #1125  variable ratio epoxy meter, mix and dispense system, heaters on tanks, head & enclosure…
Asme * 10 gallon 316 pressure tank, 130 psi, with bottom drain
Asme * coded pressure tanks, ss, 1,2,3,4,5 & 10 gal
Austin American TechARS218 Cleaning System
B&W Model C Electro punch Model C. 115 volts. 4-1/2" throat, dual buttons
Bachi  #115B 17 AWG and finer, 2-3/8" traverse, 3-3/4" OD maximum mechanical counter
Bachi #115-E/C-SCR winding machines, 3 preset electronic counters, 0 to 2-3/8" winding width, 4.5" diameter maximum, 17 AWG and finer. Several in stock, each:
Bachi #115H winder w/ counter, hand fed . Not the type with change gears. 44#
Baltec RN080 orbital rivetor
Balzers LF100 vibration isolator
Balzers LF160 vibration isolator
Balzers TCP305 electronic drive unit w/ analog pirani gauge
Balzers TCS120 pumping control unit
Balzers TSD020 18 l/s ISO63 a/c molecular drag w diaphragm pump & control
Balzers TSH170170 l/s ISO100 air cooled w/ control, DUO016B-12.7 CFM direct drive backing pump
Balzers TZK350 turbo cooling unit
Balzers Pfeiffer TMH1600C 1100 l/s, ISO200, turbo drag with control
Balzers Pfeiffer TMH520SG 500 l/s, ISO160, turbo drag, sealing gas with control
Balzers Pfeiffer TPH040 40 l/s, ISO63, without control
Balzers Pfeiffer TPH050 50 l/s, ISO63, with control
Balzers Pfeiffer TPH1500 1200 l/s, ISO200, with control
Balzers Pfeiffer TPH180H 180 l/s, ISO100, wide range hybrid with control 26# net weight
Balzers Pfeiffer TPH2200 2200 l/s, ISO250, with control
Balzers Pfeiffer TPH240 230 l/s, ISO100, with control
Balzers Pfeiffer TPH330 300 l/s, ISO100, with control
Balzers Pfeiffer TPU050 50 l/s, 4 ½"CF , air cooled with control
Balzers Pfeiffer  TPU060 56 l/s, 4 ½"CF, without control
Balzers Pfeiffer TPU062 56 l/s, 4 ½"CF, with control
Balzers Pfeiffer TPU170 170 l/s, 6" CF, with control
Balzers Pfeiffer TPU240 230 l/s, 6" CF, with control
Beckman GS-6 Centrifuge, s/n GAY96A45, 'as-is'
Bell & Gossett Series 1510 1.25BC Pump
Bell & Gossett Series 1510 Centrifugal Pump
Benchmark Sealmaster seam welding head 2" x 2" rotary or linear, w/o control
Benchmark SM8000 seam welding head, large capacity, w/o controller
BioRad SP2000A Emscope, Cryo sample prep system- +ACCS
Black & Webster AP400 air press with Protect-O-Switch and foot pedal
Black & Webster BW-50A rbital riveter .200" capacity, dual palm switches 115v & air required
Black & Webster Hugold 4AKS air press, 400 pounds 5" throat, dual anti-tie down switches
Blackstone UltrasoniN1000-SHS01-120-600/1Generator, s/n C302760-K78, 'as-is'
Blue M (Element) spare heating element. 120V, 2,000 watts. 13" long, 4" dia., 7 ohms. 26752, H2-16, H2-15-13-1/16
Blue M (Reactors) saturable reactors, most sizes. Item pictured is E13-3, 7 KW, 230 volts
Blue M C11A-3 sensor, 50 to 650°F red label and paint dot, used, tested
Blue M CR07-256B/C 11 x 20 x 20"h, 250°C Hepa filter clean room, water cooled, nitrogen purge Touchmaster controls, 208/240/1
Blue M DC-206C 20 x 20 x 20"h, 343°C, blower, ss, Eurotherm digital control & OTP 1-shelf, 208/240/60/1
Blue M DC-206C Lab Oven 208VAC, 1Ph, to 343°F
Blue M DCC-256C 21 x 20 x 19"h, 250°C, Hepa filtered clean room oven, blower, water cooled, nitrogen purged Digital controls and OTP, 208/240/1
Blue M DCI-146C 316ºC, inert gas series w/1-shelf, Digital controller w/OTP/floor stand, 208/260/1
Blue M DL-1306B Bake oven, s/n D2-913, 'as-is'
Blue M E-SP-400B-2 Bake oven (3 available), s/n HC-153, HC-163, HC-160, 'as-is'
Blue M ESP-400BC4 Bake Oven (2 available), s/n E6-508 & E6-1562, 'as-is'
Blue M IGF-146C 14x14x14" h, 316ºC, inert gas series w/2-shelves, Power-O-Matic 60 series control w/OPT, 240/60/1 2 kw.
Blue M OV-18A 18 x 19 x 15"h, 288°C, gravity , ss, one shelf, blue & white, 120 volts
Blue M OV-470A 16 x 14 x 16"h,  260°C, gravity, CS, 1-shelf w/OTP, 120 volts
Blue M OV-472A  12 x 13 x 12"h, 260°C, blower, SS with one shelf.  Retrofitted with new Watlow SD series ramping microprocessor controller    with OTP. 12 amps 115 volts. 3 year warrantee on the Watlow PIX2
Blue M OV-472A-2 Bake oven, s/n LT-262, 'as-is'
Blue M OV-480A (Parts) Spare heating element. 120 v, 1600 watts. Can be adapted to fit in OV-18A, A little shorter, less watts.  A121-258A, P61638
Blue M OV-500C-2 Bake oven, 'as-is'
Blue M  OV-500C-2 Bake oven, s/n OV3-20062, 'as-is'
Blue M OV-510A-2 Bake oven, 'as-is'
Blue M POM-106E-U 19 x 19 x 39"h, 316ºC, blower, cs. updated w/Eurotherm 818P, RS485 interface. 7 KW, Reconditioned
Blue M POM-106G 19 x 19 x 39"h, 316°C, blower, cs, Power 60 ctrl, 2 shelves OTP, 7 kw 460/3
Blue M POM-206C-1 Bake oven, s/n P14-4537, 'as-is'
Blue M POM-206GX 20 x 20 x 20"h, 204°C, blower, ss, Power 60 ctrl, OTP, 2 shelves , window 9-1/4 x 12-3/4". 7 kw, 480/3
Blue M POM-256FY-1HP  25 x 20 x 20" h, 316°C, blower, ss, Power-O-Matic 60 control, OTP 208/60/3.6kw, 1-shelf
Blue M POM-256PRE-1 25 x 20 x 20"h,  343°C, blower, ss, Power-O-Matic 60 controller w/OTP
Blue M Power-O-Matic 70 control set, CO3B-3-3, 120 volts, 1kw w/SCR control/thermistor sensor/potentiometer
Blue M Promaster 19" ctrl console only, w/recorder, 760°C microprocessor 460/3, 40 amps
Blume & Redecker (Tensions) tensions, #20-32 AWG 10@
Boesch MW-400 Mini Tor Winder w/ predetermined counter, for use in preloading shuttles for torroid winding, 115/60/l
Bold #830 Stainless steel strip/develop hood, s/n 1690, 'as-is'
Bold (Hood) 10:01, 'as-is'
Bold (Hood) 50:01, 'as-is'
Bold (Hood) Acid rinse, 'as-is'
Bold (Hood) Box washer, 'as-is'
Bold (Hood) Cup clean, 'as-is'
Bold (Hood) Guard strip metal, 'as-is'
Bold (Hood) Hot PHos (Reflux), 'as-is'
Bold (Hood) Parts clean, 'as-is'
Bold (Hood) Piranha, 'as-is'
Bold (Hood) Pt strip, 'as-is'
Branson #400A ultrasonic welder. 115/60/50/1
Branson #400B ultrasonic welder  115/60/50/1
Branson #8700  ultrasonic plastic welder,1600 watts, internal power supply 200-240/60/50/1 Air operated.  150# net weight
Brooks Automation VWA 2 Vacuum Wafer Aligner
Buehler #16-1274-260 twin Belt grinder, 16-1274-260 or 16-1272, 230/60/3 w/coolant system
Buehler * recirculating pump & tank .115 volts. 30 pound net weight
Buehler Automet 60-1900 for attachment to an 8" polisher.
Buehler Automet 60-1900 with fixturing for attachment to Ecomet series polisher
Buehler Duomet II belt grinder,115 volts. 16-1290-160
Buehler Ecomet III 49-1650-160 variable speed polisher with 8" wheel
Buehler Ecomet IV or Fibrpol 12" platen (removable wheel) 49-1676
Buehler Electromet 1721 etch cell with motor..
Buehler Isomet low speed saw model 11-1180-160 w/NEW 4"-diamond blade
Buehler Metlap 1 *
Buehler Metlap 2000 *
Buehler Micromet weight set with diamond penetrator & other accessories
Buehler Minimet polisher 69-1000-160
Buehler  Pneumet mounting press, 1 inch die. 20-1360-115
Buehler Polimet 2 position Polimet, newer version, AC eddy current motors, variable speed 100-1200 rpm w/8" wheels/sink, 115 volts
Buehler Polimet  47-1850-160, 115/230 1/2 hp, AC eddy current motor, without wheel. New Surplus 61#
Buehler Polimet 47-1852, Polimet, 2 position polisher, AC eddy current motors, variable speed 100-1200 rpm. With 8" wheels, sink, 115 volts.
Buehler Polimet 49-1870-160 DC variable speed  w/o wheel.  DC 1 HP, Includes Dart 185BDC100 control
Buehler Supermet 12" Supermet bronze Buehler 15-4042 or aluminum wheel
Buehler Supermet  2-position coarse grinder, 12" wheels, 15-1207-260, 3 hp, 230/3 with sink & upper cabinet.
Buehler Tech Met table for Surfmet
Buehler Whirlmet 60-1528 attachment
Calender *  3-roll 6x12, chrome plated, 5 hp Reeves vari drive, w/safety Controls
Camattini Protomix system for vacuum casting & polyurethane injection; rapid prototyping. 1/2 HP vacuum pump, 110 volts, CE rated
Cambion #3805-3  pin setter 3805-3 w/vibratory bowl feeder,1/8" race
Canon FPA-3000iW 4" - 8" Notch or Flat, 1996 w/installation, s/n 607211
Canon MPA-600FA Refurb., CTC Unit w/warranty, 1-Yr Ltd. Parts Warranty
Canon MPA-600Super 'as-is'
Canon MPA-600Super Refurb., CTC Unit w/warranty, 1-Yr Ltd. Parts Warranty
Captair LabX Toxicap 1000 ductless fume hood, 40 x 28 x 54" high
Carpenter #74-A  rotary wire stripper, double unit
Carver C 6 x 6 inch, 12 ton lab platen press, 2 posts with single gauge
Challenge #20 paper cutter, 20" capacity. Excellent condition. Digital readout for the back gauge. 120 volts, single phase. s/n 1800
CK SWH2325 tig torch, gas cooled, 90°C NEW 2@
Clary UPS3-15K-1A Uninterruptible Power Supply, 15 KVA 208/60/3 w/o batteries(120 volts needed)
CM Furnaces #1516H2GSFC Gas Sealed Box Furnace, Front Loading, 1450ºC, WDH: 14x16x14"
CM Furnaces #1716GSH2FL Gas Sealed Box Furnace, Front Loading, 1450ºC, WDH: 16x16x16"
CM Furnaces #1720FL Gas Sealed Box Furnace, Front Loading, 1700ºC, Chamber Size: 10x10x10"
CM Furnaces #1720S-D Gas Sealed Box Furnace, Front Loading, Top and Bottom Holes, 1700ºC, Chamber Size: 10x10x10"
Corfin DTS-300 TO-220 package solder dip machine, s/n 1000-066-01A, 'as-is'
Coweco CK winders, #18-50, 2" w x 1½", takes change gears w/o tail stock or turret
Coweco MP manual winder, with traverse. CW rotation
CPA #7814 4" ASA airw/integral H2O baffle ion & roughing port, alum gate valve
CPA #8025 6" ASA air aluminum combination cryo trap/gate valve NEW
Cress Mfg. Co. BT29ATCPM/982 Bottom Opening Furnace - Kiln, 2250ºC, 4-Zones, Chamber Size: 29" Height x 23 3/8" Decagon
CTI #1020R compressor, air-cooled
CTI  #8010 on board control module- stand alone
CTI #8011 CTI 8011 on board control module- rack mount 8052301G001 NEW
CTI #8011 CTI 8011 on board control module- stand alone Runs up to 3 cryopumps. 8052300G001 225/450v, 1 or 3 phase. 450 va PIX2  NEW
CTI #8042-001 analog temperature indicator
CTI #8044001G01 Auto Regen regeneration control
CTI #8044060 Regen Auto regeneration control
CTI #8200 compressor, air-cooled
CTI #8200 compressor, water cooled
CTI #8300 compressor & 8001 control, water cooled
CTI  #8300 compressor & 8004 On Board control, water cooled
CTI #8500 8500 compressor for multiple cryopumps
CTI CT10 10" ASA, diode, 1020RW compressor
CTI CT100  Cryogenic Pump, ISO100, diode,
CTI CT7 10" CF, H2VPG, SC compressor
CTI CT7 6" ASA, H2VPG, SC compressor
CTI CT8 10" CF, H2VPG, SCW compressor
CTI CT8 10" CF, on board, 8300 compressor
CTI CT8 6" ASA, H2VPG, SC compressor
CTI CT8 6" ASA, onboard, 8300 compressor
CTI CT8  Cryogenic Pump, 10" CF, On-Board,
CTI CT8 Cryogenic Pump, 6" ASA, On-Board, Fast Retrofit, extended array, use your existing working On-Board electronics module. 812866G001 Factory Rebuilt
CTI CT8F  Cryogenic Pump, 6" ASA, On-Board, Flat Pump P/N 8116005G004 NEW
CTI CT8F Cryogenic Pump, ISO250, On-Board, Flat Pump Factory Rebuilt
CTI MC MC compressor
Cummins/Allison *  058 heavy duty paper shredder, AKA Intimuss 444 (Germany) 3 hp, 220/440/3 Start your own accounting firm with this one!!!!!
CVC VCS22A 2" toggle CVC flange+D9, alum gate valve
CVC VCS23A  2" air CVC flange, alum gate valve
CVC VCS41B 4" ASA manual, alum gate valve
CVC VCS43A 4" ASA air, alum gate valve
CVC VCS61B 6" ASA manual, alum gate valve
CVC VCS63A 6" ASA air, alum gate valve
CVI TM150 ISO200, CBST 3.0W2 compressor
Dage (Stage) Vertical Mount Vacuum Positioning Stage
Dage BT22  Microtester X-Y Positioning Stage
Dage BT22 X-Y & Rotational Positioning Stage
Dage BT22-LC02 50gm Pull Test Load Cell for BT22
Dage BT22-MSZ Microscope Positioning Mount
Dage BT23 Shear Tester w/ LC200 Load Cell
Dage Microtester 22 10kg Shear Test Load Cell
Dage Microtester 22 Wire Shear/Pull Tester BT22
Dage Microtester 22 (Parts1.5kg Pull Test Load Cell (Microtester 22)
Dage Microtester 22 (Parts200g Pull Test Load Cell for Microtester 22
Dage Microtester 22 (Parts5kg Pull Test Load Cell for Microtester 22
Daymax * Daymax disperser 10 gal, ss, jacketed, X-Proof, 2-speed 10 + 5 hp, Excellent Condition
Dengensha (XFMR) 58 KVA welding transformer, 200/60/1 input. 6.3 to 8.7 volt secondary. 159# water cooled
Despatch LCC1-54N-2 Environmental Chamber
Despatch LEB1-21 18x14x14", 204°C, 1.2 KW gravity
Despatch PBC2-12 18 x 20 x 54"h, 210°C, blower, OTP,  w/powered exhaust f/cooling live loads, 9 KW, 208/60/3
Despatch PBC2-16 24 x 24 x 48"h, 210°C,  digital control, blower, 208/60/1  12 KW heat
Despatch PBC2-16 24 x 24 x 48"h, 210°C,  digital control, blower,  recorder, 480/3, 16 KW
Dexon  (Quartz Stocker) Small quartz stocker, s/n 26794, 'as-is'
Dexon CS-01  (7) Vertical quartz tube storage, s/n 25274, 25275, 25276, 25277 & 28050 & 26800 & ?, 'as-is'
DNS FL-820L HF bench, s/n 58630-1067
DNS SK-W60A-BVP Photoresist Coater and Developer, 6"/150mm,
DNS WS-W625 Wet bench (3 available), s/n 90520-1139, 54520-1819, 90520-1141, 'as-is'
Draiswerke, Inc PM DCP MF 85 PUC Perl Mill - Drais MegaFlow Mill, 2000
Drytek #384T Planar/RIE Plasma Cassette Etcher
DuPont #303 DuPont Instruments 303 Moisture Monitor
Dupont Riston LC-2400 laminator cleaning base with blower
Easy-Bake (Oven) Easy-Bake oven, 115 volts
Ebara/Varian #2.1 2.1 compressor
Ebara/Varian #323-0014 compressor
Ebara/Varian #4.8 4.8 compressor for multiple cryopumps FACTORY OVERHAULED
Ebara/Varian HV12 10" ASA, diode 323-1045, Factory Rebuilt
Ebara/Varian HV4 6" CF, diode 323-8046, Factory Rebuilt
Ebara/Varian HV6 ISO160, Diode, 2.1 compressor
Ebara/Varian HV8 6" ASA, diode 323-1048, Factory Rebuilt
Electrovert #364-15/A enclosed system, 15" capacity palletless finger conveyor, w/solder
Emplex MPS6340 band sealer for plastic bags. Made in Toronto. 115/60/1. 600 watts, air operated
ENI OEM-12B3 RF Generator, 3-Phase
ENI OEM-6 RF Generator
Erico Jones PW-1000 or CPW1000 stud welder, capacitor discharge, with 1/4" capacity gun.  115 or 230 volts, single phase. Not working, buy two for :
Eriez Magnetics #20N vibrator & hopper feeder, 115V
Essex #108 (Ft Wayne) coil winder, DC motor
Eubanks #2700/II stripper, 20-30 AWG solid, 20-26 AWG stranded, 1" to 999", electronic counter, stand w/air tank & prefeeder
Eubanks #51 long wire trough & stacker
Eubanks #810A  12-26 AWG, air op stripper
Eutectic (Work Holder) Heated Work Holder 6" Wafer Hot Chuck
Ewald Instr. #1548 5 kva welding transformer, 4.7 to 7.5v, 230/60/1. 50% duty cycle
Ewald Instr. A1562 2.5 kva welding transformer, 1-4.2v, 230/60/1, 50% duty cycle
Ewald Instr. WHD 2104D pneumatic welding head, 120 v coil
Exatron #3000 Exatron 3000 Base OCTO Loader Automatic Handler
Fischerscope XUVM  Fischerscope Coating Thickness X-Ray System XUVM
Fisher Isotemp 338F 18 x 12 x 20"h, 230°C  blower, stainless, OTP 2-shelves. 230/60/1
Fluke #1953A counter
Fluke #2240 C  data log
Fluke #8920A true RMS volt meter, 521 Digital Multimeter Interface, 10 Hz, 20 MHz
Fortrend F-6350  (2) Wafer transfer, 6"/150mm, s/n 0902-1774 & 0198-1240, 'as-is'
Gaertner L115  Gaertner Scientific Corp. L115 S Ellipsometer
Gallenkamp (Oven) Fan oven, 3 shelf, 470x330x330
Genmark Gencobot 7/2L-8 Robot, Prealigner, Contr
Genmark Gencobot 7/2L-8 Robot, Prealigner, Contr
GenRad #1412BC decade capacitor
GenRad #1422CB 1100pF precision variable capacitor
GenRad #1617-A capacitance bridge
Genrad #1644A megohm Bridge
GenRad #1650B impedance bridge
GenRad #1862-C megohmeter
Gorman #2 + 2 winder, 24 to 50 AWG, 2.5" dia x 4" long. 115 volts 160#
Grieve/Cole Parmer #5015-58 18 x 12 x 16" high 200°C. Gravity, spilled pitch on interior.  One shelf. 120 volts
Hapco Metal-It applicator Model 100
Heller H-103 *
Heller H-112 H-112 Leadmaster, axial components, zigzag feed
Heller Multicore solderability tester
Heller RD-70 disk capacitor former
Hewlett Packard #3421A data acq. unit, 30 channel
Hewlett Packard #3478A 5-1/2 digit multimeter. HP-IB. 115 v 60/50.
Hewlett Packard #8182A Data Analyzer
Hewlett Packard HP54120A Digitizing Oscilloscope mainframe
HiLevel Technology Topaz-V/320A Test Head
Hitachi M-216 (3) Polysilicon etcher, 6"/150mm, s/n 91E059501, etc., 'as-is'
Hitachi M308AT Metal etcher, s/n 91E1030128, 'as-is'
Hitachi S-6100  CD Scanning electron microscope (SEM), 6"/150mm, s/n 701, 'as-is'
Hitachi S6600 SEM, s/n 0701, 'as-is'
Hobart A-200 20 quart mixer, 3 speed, with stainless bowl. "B" flat beater bar.
Hollis  (Conveyor) Conveyor for TDC-189 Finger
Hughes (Foot Pedal) foot pedal
Hughes HAC-1-AC AC supply, 2½.kva built in trans. solid state
Hughes HTT-550 Thermocouple controlled time at temp. supply, 100-590 degrees C. 0.1 to 5.9 seconds. 41#
Hughes HTT-650 Solderite reflow solder power supply w/idle temperature & air latch capability
Hughes HTT-EL-GP multilead reflow soldering sys. w/HTT-550/VTA-66-TC/B&L StereoZoom 4 optics/MA-07-09 goal post assy/MA-09-32 baseplate
Hughes MA-07-09 Goal post mounting assembly
Hughes MCW 500 PCB repair welder, VTA 66 head & B&L scope
Hughes  MCW-550/EL constant voltage welder w/VTA-66 head & B&L
Hughes VTA-66 head, parallel gap
Hughes VTA-67 VTA-67 reflow head
Hughes VTA-90 small parallel gap welding head, as-is.  Left hand electrode holder has one broken leaf spring.
Hughes VTA-96 light force parallel gap welding head, 50 to 1000 grams; earlier version of Unitek 50 series head w/stand/B&L microscope/foot pedal
Hughes/Palomar VTA-66 Hughes/Palomar VTA-66 parallel gap welding head with force set by air cylinder, but actuated by foot pedal. Designed for rear mount.  With Nikon stereo microscope New Arrival
Hyprez 15LM115V Hyprez Lapping Systems 15LM115V, Engis Control
Icon/Automation UnliEC83 CNC auto etch cutting machine, 18" x 18" travel, camera C63 controller
Ideya MS-4M Solder Dipping Systems w Mitsubishi
IEC Damon HT high speed centrifuge, 20,000 rpm, w/o rotor
IMD (Reflow Bonding) printed circuit board reflow bonding station
Int'l Micro Ind. SPB-1300E TC/Ultrasonic bonder w/Neat X-Y stage 24" x 24" travel, 1989, w/o stepper controls/computer or ultrasonic supply
IVI  (Evaporator) Vacuum evaporator, 'as-is'
IVS #100  Overlay measurement, s/n 100960201, 'as-is'
Jade Corp. MTP  MTP Bonding System CA-I
Janis Research DT cryostat model DT, 2/n 1995
JC Systems #520 Controller/Setpoint Programmer
Justrite * Acid storage cabinet, 3 shelves, 45 gallon capacity. Fair condition
K&S #1471 Kulicke & Soffa 1471 Automatic Wire Bonder
K&S #1484 Kulicke & Soffa 1484 Automatic Wire Bonder
K&S #4123 Manual Wedge Wire Bonder
K&S #4124 Thermosonic Gold Ball Wire Bonder
K&S #4129 K&S 4129 Deep Access 90° Wedge Wire Bonder
K&S #984.-6 Kulicke & Soffa 984-6 Wafer Dicing Saw
Karl Suss (Prober) Wafer Prober Probe Station w/Wild M3Z
Karl Suss MA25 Aligner, 'as-is'
Keith Company KSK-12 Front Loading Furnace, 1700ºC
Kenco Industries #600 Omega Meter model 600 115 volts
Kewaunee #2C351-20 radiochemical glove box, 36" x 17" x 22, stainless. w/o air locks, just sliding doors
Kewaunee * vacuum pass through, stainless
Kinematica Polytron PTD-EX disperser/homogenizer, 1.6 KW, 3phase motor, X-proof. w/detachable generator
Kinematrix #802 automatic laminating machine, with nests for 7/8, 1, 1-1/8, 1-1-1/4 and 1-1/2 inches. 115 volts
Kingsley HS tubing ink dryer
KLA-Tencor AlphaStep 300 Profilometer, 1992, s/n 0492-0139
Komax #27 cable drawing machine
Komax #33 wire cutter & stripper, 1 mm to 100 meters,AWG 14 to 30 stranded, 20 to 30 solid. 115 volts 50/60 hz. 55 # net weight.
Labconco #36214-00 Purifier Class II 6" laminar flow safety hood, last used w/Li Hydroxide
Labconco #50004 glove box w/Vacuum Atmospheres HE-63-P Pedatrol 35 x 25 x 28"h
Lab-Line Imperial III 3459M-1, 23 x 17 x 18, 300°C, stainless, ultra-clean radiant heat design. Brackets, but w/o shelves, 3kw, 230/1
Lab-Line Imperial IV Ultra-Clean 100 3490M, 13 x 18 x 19.5" high, 250°C, ss, 3 shelves, mpu controller w/OTP, 120 volts, 16 amps
Lamaco BEO 78 butt stacker, 7/8" capacity, ¼HP, 115/60/1
Lamb Knitting Machin#ST5 circular weft knitting machine, requires ¼ hp DC motor & control.
Laurier SA202 Laurier Associates SA202 Epoxy Die Bonder
Laurier SA210 Laurier Associates SA210 Epoxy Die Bonder
Leatherwood (Tube Stocker) (2) Quartz stocker, s/n 8961.0800 & 8960.08, 'as-is'
Leatherwood (Tube Stocker) Horizontal quartz furnace tube stocker, s/n 8959.1000b, 'as-is'
Leco AP-50 power head, catalog number 830-600
Lee Laser #818TQ (11) Laser Systems, 2005, Used for 1-Year - Like NEW Condition.
Leesona (Essex) #108 coil winder. Shifting brush style motor, 9 to 1000 turns per inch 19 to 42 B&S wire gauge
Leesona Essex #108 brake release solenoid ES-405, 865.0025A.115 volts New Surplus. Several available.
Leesona Essex #108 gear transmission assembly
Leesona Essex #108 pipe frames for tensions
Leesona Essex #108 Tension
LeFort (TrioTech) * 11 ¾" dia x 11 ¾"h, 200 psi @ 500°F, quick acting seal, pressure vessel
Lehmann Thropp * rubber mill, 3" dia x 8" long, Lab size. Mixes up to 130 cc, about .3 to .4 pounds…
Leitz Ergolux Microscope w/Exposure Unit/Camera/Polaroid Lense, Eyepieces - 5x 10x 20x 50x 100x 
Leitz Labolux 12 me Microscope with light source
Leitz Miniload  micro hardness tester, diamond, 10 & 200 gram weights.
Leitz Miniload micro hardness tester, Knoop diamond, without weight set.
Leybold NT1000/1500 controller FACTORY OVERHAULED
Leybold TMP150 145 l/s, 6"CF, air cooled/as-is needs bearing without control
Leybold TMP150 145 l/s, ISO100, air cooled w/o control
Leybold TMP150CSV 145 l/s, ISO 100, oil lubricated w/ control
Leybold  TMP150CSV l45 l/s, 6" CF, oil lubricated w/ control
Leybold TMP340M 270 l/s, ISO100, mag bearing with control
Leybold TMP340MCT 270 l/s, ISO100, mag bearings without control FACTORY REBUILT
Leybold TMP360 345 l/s, 6" CF, ceramic bearing without control
Leybold TMP360 345 l/s, ISO100, w/ control NEW
Leybold TMP360CSV 345 l/s, 6" CF, oil lubricated w/ control
Leybold TMP450 500 l/s, 6" ASA, w/ control FACTORY REBUILT
Leybold Turbotronik NT10 turbo controller Kat# 859 01. 120 volts 50/60 Hz. Operates Turbovac 50. 4#
Leybold Turbotronik NT20 turbo controller. Operates Turbovac 361 and 1100 C
Leybold Turbotronik NT50 turbo controller Kat# 854 03, 95-240v 50/60 Hz Operates Turbovac 50 3#
Lindberg #53015 12x30 hot plate, 400°C
Lindberg / Blue M Stabil-Therm Electric Oven
Linde PWM-9 needle arc welder, 100 amp, built-in cooler
Lodestar 16 FPM 1/4 ton electric hoist w/trolley, 16 FPM 115 volts.
LTX Fusion HF Digital tester, 'as-is'
M Braun MB 150M Box glove box w/Innovative Technology System I microprocessor control update.
M E Braun MB150-GII triple section glove box w/dual load locks & oxygen & water removal circulating system.
Magnetic Instrumenta#7500 900-2I 6,000 joule magnet charger. F-2645 transformer, water cooled. 230/60/1 input
Magnetic InstrumentaRFL 440 magnet charger with booster capacitor unit. Does not include pulse transformer.
Marsh (Stencil Cutter) stencil cutter, 1/2" type
Matheson/Semi Gas Gas cabinet 3-bottle gas cabinet, new (3 available), s/n GCET407, GCET401, & GCPH403, 'as-is'
MDA System 16 Toxic gas monitor (2 available), s/n S/6-3232 & S/6-0475, 'as-is'
Mechtrix #5101 pre-feeder. 115 volts, variable speed DC drive. 5/8" arbor with swing up to 12" dia., s/n 1114
Mesa West (Plating Line) gold plating line, 10 tanks, 3 heated, MPC-50-T 3-6 volt supplies w/two electronic amp-time controllers
Meteor #307 power supply/pedal assembly
Meteor #307 winder, 24-60 AWG, 4" width electronic controls
Meteor #307-101A coil winder24-60 AWG, 4" width
Meteor #484 tension 32 to 46 AWG, 15 to 300 grams
Meteor #485 tension 20-34 AWG, 170 to 3000 grams
Meteor MMS 100 automatic 5 head winder, 80 mm traverse, 40mm diameter maximum. PC controlled, 1999, s/n 6130.98.02.08
Metronics * washer for ampuls, vials, & bottles, 3 heads
Mettler H54 suspended pan balance, 160 grams, x-proof light , semi-micro
Mettler H5SA micro balance, 20 gram
Mettler LP11 moisture balance heater for top loader 2@
Mettler P10 mechanical balance 10 KG 1 gram, top loading
Mettler P163 top loading balance 160 gram, 1 mg, mechanical
Micro Air * Mfg 4' fume hood, poly construction, 17 x 17 poly sink, 11" dia SS sink & lamp
Micro Vu Smartscope 250 Video Microscope
Micromanipulator #6000 Prober / Probe Station
Micromanipulator #6100 Prober / Probe Station
Miller Gold Star 300SS DC welding supply 230/460/3 x 32 volts, 300 amps, cart mounted
Miller Designs #2008  Probe Station, 8"
Millipore (Filters) PVC Millipore filters many sizes
Mini Laz #310 with thermal printer dpu-414
Miyachi CY-210B digital AC welding controller w/Dengensha WT3 CS6 XFMR, 50 kva, and water cooled SCR. 200 x 6.3-8.7v, 60/1
Miyachi CY-210B welding controller w/SC-90-2 SCR/MT-510A transformer, 1.6 kva rated, 5.6 kva max. 208/60/1
Miyachi CY-210B-90 welding controller w/integral rear mounted SCR/MT-520A transformer, 3.2 kva rated, 18.5 kva max. 208/60/1
Miyachi IS-221A 1khz inverter welding controller w/IT-512A transformer, 22 kva,  208/60/3
Miyachi Miyachi IT-85 inverter transformer, 85 kva, 650v, 1000 hz. 8.9/9.5 secondary, 73:1, 68:1 ratio. water cooled, 2 gpm. 60 pounds, 2 avail.
MKS ROR-8U-S  Gas flow rate calibrator, s/n 95026002N, 'as-is'
MRL Industries #228200 Ion source vacuum oven, s/n 910501, 'as-is'
MRL Industries #350-927115 Implanter parts oven, s/n 67851, 'as-is'
MSA * 5 minute escape respirators w/airline filters carrying case
Napco/Jouan NLW-400  glassware washer. 30 x 14 x 17" deep, 230/60/3
Nelmor G810M1 hammer mill crusher, G810M1, 5 hp, cabinet
Nester/Faust * molecular still, 1" barrel
New Brunswick B65 freeze dryer, B65 w/refrigeration & pump 14 port, vacuum drum
Nikon #2205 i11D Stepper (2 available), 8" notched wafers; 6" reticles; 5iB5 lens, 1996, s/n 11602 & 11603, 'as-is'
Nikon Optistation 3 Wafer inspection, 6"/150mm, s/n 20342, 'as-is'
Nikon Optistation VII 300mm automated wafer inspection tool w/FOUP loaders/robotic wafer handling/ULPA filtration
Nitto DR-6304  Wafer tape apply, 6"/150mm, 1993, s/n 93138, 'as-is'
Nitto HR-6304  Wafer tape apply, 6"/150mm, 1993, s/n 93139, 'as-is'
Nitto Kohki vp0660-v1003-a1-0001 vacuum pump
North American (Blopwer) blower, 550 CFM @ 12 oz, 3 HP, 230/460, 6" NPT outlet
Northrop Grumman (Sealer) pressure heat sealing system, with 28" diameter turntable, 3" roller, 2.5" piston. Moves head in X-Y
Norton (Jar) 1.3 gallon steel jar, rubber lined, 10.5" OD, 7-5/8 ID x 6-3/4" deep.
Norton  (Jar) 4.5 gallon jar, steel, Teflon lined (cracked) 11.5dia x 10" deep
Novellus #02-00345-00 TEOS cabinet with scales, 'as-is'
Novellus Concept 2 Dual SPEED Classic CVD HDP, 6"/150mm, SECSII/GEM interface, s/n D11216A, 'asi-is'
NRC (Gate Valve) 4" ASA manual, alum gate valve
NRC (Gate Valve) 6" ASA air, alum gate valve
NRC (Gate Valve) 6" ASA manual, alum gate valve
NSK  Megatorque Motor Controller System
NSK W1201-112P-C125 Ball Screw, 2-Sets of 4 Available
Olympus Tokyo (Microscope) Inverted microscope, s/n 204229, 'as-is'
Omega Omegaline 660-06 6 pen temperature recorder, O megaline 660-06 w/5 type K modules
Optima (Rack) 19" rack, 14" opening, fan, 115V, feet, handles, blue & white
Orthodyne #20R Wire Bonder w/Nikon SMZ-1 Scope
Oryx  (PC Drill) PC drill, 9" throat, As-New, PCD
Packaging IndustriesFPD heat sealing press, air operated 12" x 12", 220/1
Packman Research (PC Scriber) PC scriber, 13 1/2" x 15" lead screw driven manual scriber. mounted over 16 x 17 light table, Precision micrometer dial on hand crank
Panasonic UDDF-RM002 AC Servo Drive Unit, Panosonic
Patterson-Kelley IB-4P twin shell blender, plastic, 4 quart, missing pin intensifer bar
Patterson-Kelley YB-B yoke blender base w/o Plexiglas shells. 115v
Pearl (Drum Set) Drum set, local Massachusetts pick up only
Peltman Corp. MIGL-37 automatic low pressure molding system for metal & ceramic powders.
Perkin-Elmer Micralign 240 Mask aligner (4 available), s/n G1434, E1903, C1244, L1905, 'as-is'
Perkin-Elmer Micralign 300/341 Mask aligner (3 available), s/n D2140, D2020, D3171, 'as-is'
Perkin-Elmer Micralign 641HT Mask aligner, s/n D70224, 'as-is'
Pfaudler * ss 50 gallon tank w/inner coil & 2" drain & top
Phoenix (Dry Rod) #300 18d x 19" d, 550°F, oven
Pilamec Megapact ball mill, continuous lab mill w/water cooling, dual cylinders, 2" dia x 22" long 220, 3 ph
PlasmaTherm HFS 1000E Plasma Therm HFS 1000E RF Generator, 1KW
PlasmaTherm HFS 500E Plasma Therm Type HFS 500E RF Generator
PMS LPS-16 w/ CLS-600 Particle Measuring Systems
Polaris All-0001-02 seam welding head w/o controls
Queens Hydraulic Co.#75T-SP3 Hydraulic Press with Heated Platens
Raytheon #125-3077 welding transformer for 60C Mark II
Raytheon #2-205 Raytheon 2-205 weldpliers (tweezers head) up to 5 kva with water cooling. 1 to 25# force 3-7/8" throat
Raytheon #2-240-13  welding transformer for model 1100/1101 supply. 400#
Raytheon #225 welding  transformer 225 wt-sec, capacitor discharge
Raytheon #2-250 weld calibrator 2-250 to 225 watt/sec or 5 kva 2@
Raytheon  (J Head) Raytheon J head, 2 kva or 100 wt-sec, 1-10 pound force, 9#
Raytheon (XFMR) 1.5 kva welding transformer, 120/240 x .75, 1.5, 2.25, 3 volts. Enclosed, 43#
Raytheon QB Raytheon QB air op welding head, 500 watt/sec/5 kva 30#
Red Oaks RJM-2D mill machine,2 tier slurry jar mill 48"rolls
Reeve L4D 1 kw RF heater, fuses pre-tinned wires for stripping. Needs oscillator tube.
RFL #2470-350 magnet charger, w/o transformer s/n 296
RFL (Watt Meter) True RMS digital watt meter, 22 KW, 600V, 25 A max
RFPP HFS 3000E RF Products HFS 3000E Generator, 3KW
Rhine  (Breathing Sys.) breathing air system 12 hp two sets hose & hoods, 115V
Rhode & Schwarz SMIQ03B Signal Generator, 300KHz - 3.3 GHz, ~2004
Rigaku S/Max XRD autosampler/auto-changer, 24 position
Robatech #123702 Ecoline Manual Glue Application System
Rucker & Kolls #300 Probe Card Building Station
Rucker & Kolls #691 R&K 691 Automatic Wafer Prober
Sankyo AWC-662S  HF bench, 6"/150mm, 'as-is'
Scienscope * Scienscope & SSZ Light Source, 240V 60Hz
Scott/MSA * air escape packs, 30 minute
Sealweld/Benchmark #8000 seam welder with old control system
Semifab (Chiller) Environmental Control Chiller
Shimadzu SCL-10A System Controller
Shriver (EIMCO Process) size 7 non-washing filter press
Shriver (EIMCO Process) size 7 washing filter press
Signatone S-250-5 Wafer Prober / Probe Station
Signatone S-925 Vacuum-Base Micropositioner
Signatone S-925 Vacuum-Base Micropositioner
Sincrofil (Bobbin Winder) bobbin winder w/ 5" width, pre-determined counter 1 tension
Sippican (Tweeze Heads) tweeze heads SEVERAL
SLEE * vacuum glove box, SV15, vac oven in rear, 15x15x20", 3 gloves
Sorvall OVNAA115S Hybridization Oven (to 95°C)
SRT MP1000F-IR Chip Bonder/ Rework Station, PCB
SS White K Model K abrasive unit w/glove box
SS White/Penwalt H H abrasive unit, large hopper
SS White/Penwalt HME HME abrasive unit, oversize feed hopper.
SSEC #1000 seam welding head & supply, 6.5 x 6.5" and circular to 6.5" Does not include the XFMR
SSEC (Seam Welder) seam welder in VAC glove box with vacuum oven
Standard Research (SSR620 universal time interval counter 
STEC SF-2000 MFC calibration kit, s/n 2025145, 'as-is'
Stevens #225-AM progressive universal winder, for RF Chokes, etc. 20 to 48AWG and up to 1.25" wide coils
Stevens #310AM coil winder w/ powered tailstock, electronic controls & counter. No traverse. 1/4 hp motor. s/n 26932 18-40 AWG
Stevens #310AM hand fed